Nearly all of the time, businesses will spend a lot of money to purchase their lift trucks. It is essential, therefore to take good care of your machine to protect your investment into the long run. It is a great idea to know the procedures that are undertaken in the care and maintenance of this piece of machine.
One of the best ways to tell how good the engine is performing is by starting the lift truck up and listening carefully to see how it works. Like for example, if there are any knocks or misses, the equipment is faulty and this must raise some concerns. Additionally listen carefully for any squealing sounds which come from the belts since these sounds will provide you with a lot of information.
Some of the main components requiring attention during maintenance include the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty components should be replaced as soon as they are noticed. It is also imperative to check the wiring.
The battery compartment terminals should be cleaned after the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Every battery cell should be checked in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters should be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change is done and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Check the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Then, inspect every other part of the machinery including the wheels. If any type of fault or issue is detected, be sure to address it immediately so as to make certain the machinery is running at its safest and optimum levels.